Products
USi-412(Si-172)
+
  • USi-412(Si-172)

USi-412(Si-172)


The finished products are packaged in 5KG, 25KG, and 200KG plastic drums, and other specifications require pre order.

Category:

Product Details

  • 产品描述
  • Product Description

    Chemical name: Ethylenetris (2-methoxyethoxy) silane

    Corresponding foreign products:

    Momentive:A-172

    Dow corning:Z-6172

    ShinEtsu:KBC-1003

     Dynasylan:VTMOEO

    CAS NO.: 1067-53-4

    EINECS NO.: 213-934-0

    Chemical structure:

    1

    Typical cardinality data

    The following values are not applicable to standard specifications.

    Please confirm with us before writing specifications for this product.

    Appearance: Colorless and transparent liquid

    refractive index (1): 1.4280±0.0050

     

    density (ρ 20℃,g/cm3): 1.0340±0.0050

    chroma (Pt-Co):≤25

    purity(GC,%):≥98.0

    Application method

    ● It can improve the electrical properties and mechanical strength of EPDM, cross-linked polyethylene, and their polymers or resins filled with inorganic fillers, especially in wet conditions where their performance is more significant. Widely used in the ethylene, propylene, diene based EPDM rubber and cross-linked polyethylene wire and cable industry.

    ● It can improve the mechanical strength of composite materials such as cross-linked, inorganic filler filled, or reinforced polyester in dry and wet states. It can reduce the moisture absorption of cross-linked polyester molding materials, thereby improving the electrical performance and mechanical strength in wet environments.

    ●It can be copolymerized with monomer in lotion or coating polymer, and grafted with active functional group or unsaturated polymer to produce room temperature cross-linked water-based and solvent based coatings such as acrylic latex coatings.

    Safety and Storage

    Customers should check the latest MSDS and product safety information labels.

    Personal safety operation instructions: When necessary, provide protective equipment and any special storage conditions required for safety.

    Keep away from heat sources and open flames, and store in a cool and dry place.

    It must be stored sealed, otherwise it will be hydrolyzed by moisture and form polymers.

    Packing Specification

    The finished products are packaged in 5KG, 25KG, and 200KG plastic drums, and other specifications require pre order.

Related products