Product Series
Request A Quote
Get Your Customized Equipment Quote in 24 Hours – Global Solutions, Local Support.
Product Details
- 产品描述
-
Silane USi-6802E – Octyltriethoxysilane Water Repellent Gel
Thixotropic, Ready-to-Use Waterproofing Gel for Vertical & Overhead Surfaces
Active Ingredient: Octyltriethoxysilane (C8)
Form: Water-based thixotropic gel
Active Content: 80%USi-6802E is a ready-to-apply, water-based thixotropic gel formulated with high-purity octyltriethoxysilane. Engineered for professional use on vertical, overhead, and horizontal concrete surfaces, it delivers deep-penetrating, long-lasting water repellency without dripping, running, or altering the substrate’s appearance. Ideal for bridges, parking structures, tunnels, facades, and repair zones where conventional liquid sealers fail.
🧪 Product Description
Unlike solvent-based liquids or emulsions that sag on walls, USi-6802E’s unique gel structure:
- Stays in place on vertical and ceiling surfaces—no runoff, no waste
- Penetrates deeply into cementitious substrates via capillary action
- The active octyltriethoxysilane hydrolyzes and chemically bonds to the concrete matrix, forming a hydrophobic barrier within the pores—not on the surface
- Treated surfaces remain breathable, non-glossy, and visually unchanged—preserving architectural integrity and slip resistance
✅ Key Advantage: Eliminates the need for multiple coats or specialized spray equipment—one application, zero mess, even upside down.
📊 Typical Properties
Values are typical and not for specification. Confirm with technical team before use.
Parameter Specification Appearance White emulsion (thixotropic gel) Active Content 80% pH Value 7–8 (neutral) Specific Gravity (20°C) ~0.9 g/cm³ Viscosity (20°C) ≥ 5,000 cP (gel-like, non-drip) Solubility in Water Miscible
🏗️ Application Guidelines
✅ Surface Preparation
- Substrate must be clean, dry, and free of oil, dust, curing compounds, or release agents
- Fresh concrete or repaired areas must cure and dry for at least 28 days before treatment
🖌️ Application Method
- Apply by brush, roller, or low-pressure spray
- No runoff on vertical/overhead surfaces due to thixotropic nature
- Recommended rate: 300 g/m² (one coat) for standard concrete impregnation
- Adjust rate based on concrete density and desired penetration depth—conduct a trial area first
⏳ Curing & Drying
- Allow treated surface to cure undisturbed for minimum 6 hours
- Full hydrophobic effect develops as silane reacts with moisture in the substrate over 24–72 hours
🏭 Key Applications
🔹 Infrastructure Waterproofing
- Bridge decks, tunnel linings, parking garages, retaining walls, elevated slabs
- Protects against chloride ingress, freeze-thaw damage, rebar corrosion, and carbonation
🔹 Architectural Concrete & Restoration
- Historic buildings, precast panels, façades, balconies
- Preserves original texture and color while preventing efflorescence and staining
🔹 Repair & Patch Zones
- Ideal for localized treatment of crack repairs, spall patches, and joint areas
- Bonds seamlessly with existing treated concrete
📦 Packaging
Available in convenient, job-site-ready containers:
- 25 L pail
- 200 L drum
- 1000 L IBC tote
⚠️ Safety & Storage
- Store in original sealed containers at ambient temperature
- Keep from freezing and direct sunlight
- Non-flammable (water-based), but avoid eye/skin contact
- Consult latest SDS at www.usi-chemical.com or upon request
📞 Contact Us
Nanjing Union Silicon Chemical Co., Ltd.
Innovator in Ready-to-Use Silane Gel Technology for Demanding Construction Environments- Headquarters:
Room 2002, Overseas Chinese Plaza, No.1 Daqiao North Road, Nanjing 210031, Jiangsu, P.R. China - Factory Address:
Dongcheng Guanli District, Gaizhou 115200, Liaoning, P.R. China - Tel: +86-25-5889 5266 / 5889 5699
- Fax: +86-25-5830 5349
- Website: www.usi-chemical.com
- Email: inquiry@usichemical.com
Keywords:
Previous Page
Next Page
Related products
Request A Quote
Get Your Customized Equipment Quote in 24 Hours – Global Solutions, Local Support.